1. Define "focal point."
2. Do images always form at the focal point? If not, what determines if/where an image is formed?
3. How are convex and concave lenses different?
4. How are convex and concave mirrors different?
5. Revisit the final problem from the last problemset. Draw what happens to parallel rays of light as they pass through:
a. convex lens
b. concave lens
c. convex mirror
d. concave mirror
6. Play around with the lens applet used in class to see how image formation depends on the location of the object.
7. Describe the difference between nearsightedness and farsightedness, and the lenses used to correct each.
8. Describe the operation of a basic reflecting telescope.
Wednesday, October 30, 2013
Doppler and Light etc. problems
1. Doppler effect. A police car approaches you. According to the siren's manufacturer, the frequency is 1000 Hz. How would the frequency change if you were located:
a. behind the car as it passed you
b. in front of the car as it approached you
c. in the car
d. running toward the car, if it were at rest
e. running away from the car, if it were at rest
2. What does the red shift of distant galaxies suggest?
3. What do red shift and blue shift mean?
4. Explain the Doppler effect.
5. Consider a 320 Hz note (E, approximately). What is the frequency of:
a. the next E (one octave above)
b. the E one octave below
c. an E that is 3 octaves above
d. an F, one semi-tone above
e. a G, three semi-tones above
(You don't have to calculate these, but show how it would be done.)
6. Explain the idea of reflection (of light). What is the 'law of reflection'?
7. What happens during refraction? What changes exactly? (Hint: more than one thing could change during refraction.)
8. Light goes from air into a rectangular piece of glass. If the light hits the glass at an angle of 45 degrees (with respect to the normal line), how is it refracted inside the glass? Draw this situation. Would the refraction angle be greater than, less than or the same as 45 degrees?
9. Light passes from water into air - basically the opposite of the previous problem. Light hits the surface of the water (from below) at an angle of 45 degrees. Revisit the previous problem and answer/draw what is expected.
* Problem 9 can refer to "total internal reflection", or what happens when light hits the surface INSIDE the substance (water, plexiglas, etc.) at angle too great to leave. This phenomenon allows for fiber optics, as well as strange effects seen when you look into an aquarium.
10. Draw what is expected when parallel rays of light hit:
a. convex lens
b. concave lens
c. convex mirror
d. concave mirror
e. flat mirror
a. behind the car as it passed you
b. in front of the car as it approached you
c. in the car
d. running toward the car, if it were at rest
e. running away from the car, if it were at rest
2. What does the red shift of distant galaxies suggest?
3. What do red shift and blue shift mean?
4. Explain the Doppler effect.
5. Consider a 320 Hz note (E, approximately). What is the frequency of:
a. the next E (one octave above)
b. the E one octave below
c. an E that is 3 octaves above
d. an F, one semi-tone above
e. a G, three semi-tones above
(You don't have to calculate these, but show how it would be done.)
6. Explain the idea of reflection (of light). What is the 'law of reflection'?
7. What happens during refraction? What changes exactly? (Hint: more than one thing could change during refraction.)
8. Light goes from air into a rectangular piece of glass. If the light hits the glass at an angle of 45 degrees (with respect to the normal line), how is it refracted inside the glass? Draw this situation. Would the refraction angle be greater than, less than or the same as 45 degrees?
9. Light passes from water into air - basically the opposite of the previous problem. Light hits the surface of the water (from below) at an angle of 45 degrees. Revisit the previous problem and answer/draw what is expected.
* Problem 9 can refer to "total internal reflection", or what happens when light hits the surface INSIDE the substance (water, plexiglas, etc.) at angle too great to leave. This phenomenon allows for fiber optics, as well as strange effects seen when you look into an aquarium.
10. Draw what is expected when parallel rays of light hit:
a. convex lens
b. concave lens
c. convex mirror
d. concave mirror
e. flat mirror
Lenses
Lenses

As shown and discussed in class, light refracts TOWARD a normal line (dotted line, perpendicular to surface of lens) when entering a more dense medium.
Note, however, that this direction of bend changes from down (with the top ray) to up with the bottom ray. This is due to the geometry of the lens. Look at the picture to make sure that this makes sense.
The FOCAL LENGTH (f) of a lens (or curved mirror) where the light rays would intersect, but ONLY IF THEY WERE INITIALLY PARALLEL to each other. Otherwise, they intersect at some other point, or maybe not at all!
The location of images can be predicted by a powerful equation:
1/f = 1/di + 1/do
In this equation, f is the theoretical focal length (determined by the geometry of the lens or mirror), do is the distance between the object and lens (or mirror) and di is the distance from lens (or mirror) to the formed image.
We find several things to be true when experimenting with lenses. If the object distance (do) is:
greater than 2f -- the image is smaller
equal to 2f -- the image is the same size as the object (and is located at a di equal to 2f)
between f and 2f -- the images is larger
at f -- there is NO image
within f -- the image is VIRTUAL (meaning that it can not be projected onto a screen) and it appears to be within the lens (or mirror) itself
If an image CAN be projected onto a screen, the image is REAL. Convex lenses (fatter in the middle) and concave mirrors (like the inside of a spoon) CAN create real images - the only cases where there are no images for convex lenses or concave mirrors are when do = f, or when do < f. In the first case, there is NO image at all. In the second case, there is a magnified upright virtual image within the lens.
Concave lenses (thinner in the middle) NEVER create real images and ONLY/ALWAYS create virtual images. This is also true for convex mirrors (like the outside of a spoon, or a convenience store mirror).
Play around with this applet:
http://www.physics.metu.edu.tr/~bucurgat/ntnujava/Lens/lens_e.html
Convex lenses (which are defined to have a positive focal length) are similar to concave mirrors.
Concave lenses (which are defined to have a negative focal length) are similar to convex mirrors.
This is a bit more complicated, but here are some images and information for mirrors:
http://www.physicstutorials.org/home/optics/reflection-of-light/curved-mirrors/concave-mirrors
>
http://www.physics.metu.edu.tr/~bucurgat/ntnujava/Lens/lens_e.html
The key thing to note is that whether or not an image forms, and what characteristics that image has, depends on:
- type of lens or mirror
- how far from the lens or mirror the object is
In general, convex lenses and concave mirrors CAN form "real" images. In fact, they always form real images (images that can be projected onto screens) if the object is further away from the lens/mirror than the focal length.
If the object is AT the focal point, NO image will form.
If the object is WITHIN the focal point, only virtual images (larger ones) will form "inside" the mirror or lens.
Concave lenses and convex mirrors ONLY form virtual images; they NEVER form real images. Think of convenience store mirrors and glasses for people who are nearsighted.
http://www.physics.metu.edu.tr/~bucurgat/ntnujava/Lens/lens_e.html
Monday, October 28, 2013
Problems in light - 1
1. All electromagnetic waves have the same _______. Discuss.
2. Explain the law of reflection. What does it mean and what does it have to do with mirrors?
3. When and why does refraction occur?
4. Draw a picture that depicts a single light ray entering and exiting a glass rectangular block.
5. Draw a picture that depicts a single light ray entering and exiting a convex lens.
6. Repeat for a concave lens.
7. Repeat for an equilateral prism.
8. What is total internal reflection and when does it occur?
9. What is an index of refraction? Related to this, what is the point of high-index lenses?
10. What is the difference between nearsightedness and farsightedness?
2. Explain the law of reflection. What does it mean and what does it have to do with mirrors?
3. When and why does refraction occur?
4. Draw a picture that depicts a single light ray entering and exiting a glass rectangular block.
5. Draw a picture that depicts a single light ray entering and exiting a convex lens.
6. Repeat for a concave lens.
7. Repeat for an equilateral prism.
8. What is total internal reflection and when does it occur?
9. What is an index of refraction? Related to this, what is the point of high-index lenses?
10. What is the difference between nearsightedness and farsightedness?
Wednesday, October 23, 2013
Light 2 - Refraction
Reflection - light "bouncing" off a reflective surface. This obeys a simple law, the law of reflection!
The incident (incoming) angle equals the reflected angle. Angles are generally measured with respect to a "normal" line (line perpendicular to the surface).
Note that this works for curved mirrors as well, though we must think of a the surface as a series of flat surfaces - in this way, we can see that the light can reflect in a different direction, depending on where it hits the surface of the curved mirror. More to come here.
Refraction:
Refraction is much different. In refraction, light enters a NEW medium. In the new medium, the speed changes. We define the extent to which this new medium changes the speed by a simple ratio, the index of refraction:
n = c/v
In this equation, n is the index of refraction (a number always 1 or greater), c is the speed of light (in a vacuum) and v is the speed of light in the new medium.
The index of refraction for some familiar substances:
vacuum, defined as 1
air, approximately 1
water, 1.33
glass, 1.5
polycarbonate ("high index" lenses), 1.67
diamond, 2.2
The index of refraction is a way of expressing how optically dense a medium is. The actual index of refraction (other than in a vacuum) depends on the incoming wavelength. Different wavelengths have slightly different speeds in (non-vacuum) mediums. For example, red slows down by a certain amount, but violet slows down by a slightly lower amount - meaning that red light goes through a material (glass, for example) a bit faster than violet light. Red light exits first.
In addition, different wavelengths of light are "bent" by slightly different amounts. This is trickier to see. We will explore it soon.
The index of refraction is a way of expressing how optically dense a medium is. The actual index of refraction (other than in a vacuum) depends on the incoming wavelength. Different wavelengths have slightly different speeds in (non-vacuum) mediums. For example, red slows down by a certain amount, but violet slows down by a slightly lower amount - meaning that red light goes through a material (glass, for example) a bit faster than violet light. Red light exits first.
In addition, different wavelengths of light are "bent" by slightly different amounts. This is trickier to see. We will explore it soon.
Refraction, in gross gory detail
Consider a wave hitting a new medium - one in which is travels more slowly. This would be like light going from air into water. The light has a certain frequency (which is unchangeable, since its set by whatever atomic process causes it to be emitted). The wavelength has a certain amount set by the equation, c = f l, where l is the wavelength (Greek symbol, lambda).
When the wave enters the new medium it is slowed - the speed becomes lower, but the frequency is fixed. Therefore, the wavelength becomes smaller (in a more dense medium).
Note also that the wave becomes "bent." Look at the image above: in order for the wave front to stay together, part of the wave front is slowed before the remaining part of it hits the surface. This necessarily results in a bend.
The general rule - if a wave is going from a lower density medium to one of higher density, the wave is refracted TOWARD the normal (perpendicular to surface) line. See picture above.
http://lectureonline.cl.msu.edu/~mmp/kap25/Snell/app.htm
http://www.physics.uoguelph.ca/applets/Intro_physics/refraction/LightRefract.html
http://lectureonline.cl.msu.edu/~mmp/kap25/Snell/app.htm
http://www.physics.uoguelph.ca/applets/Intro_physics/refraction/LightRefract.html
Light 1 - Electromagnetic Spectrum revisited
Recall that waves can be categorized into two major divisions:
Mechanical waves, which require a medium. These include sound, water and waves on a (guitar, etc.) string
Electromagnetic waves, which travel best where there is NO medium (vacuum), though they can typically travel through a medium as well. All electromagnetic waves can be represented on a chart, usually going from low frequency (radio waves) to high frequency (gamma rays). This translates to: long wavelength to short wavelength.
All of these EM waves travel at the same speed in a vacuum: the speed of light (c). Thus, the standard wave velocity equation becomes:
c = f l
where c is the speed of light (3 x 10^8 m/s), f is frequency (in Hz) and l (which should be the Greek letter, lambda) is wavelength (in m).
Mechanical waves, which require a medium. These include sound, water and waves on a (guitar, etc.) string
Electromagnetic waves, which travel best where there is NO medium (vacuum), though they can typically travel through a medium as well. All electromagnetic waves can be represented on a chart, usually going from low frequency (radio waves) to high frequency (gamma rays). This translates to: long wavelength to short wavelength.
All of these EM waves travel at the same speed in a vacuum: the speed of light (c). Thus, the standard wave velocity equation becomes:
c = f l
where c is the speed of light (3 x 10^8 m/s), f is frequency (in Hz) and l (which should be the Greek letter, lambda) is wavelength (in m).
Subscribe to:
Posts (Atom)




